Bulk Water Station

Hauling Water? Need to Fill Large Containers?

Evergreen Metropolitan District has a water fill station at 26370 State Highway 74 in Kittredge. There are three lanes to pull vehicles into and hook up hoses:

• One 3/4" garden hose connection on the parking lot island. This connection is only open seasonally during warmer months, approximately May through October, when there is not a chance of freezing. Only credit/debit cards are accepted. 
• One 3/4"  garden hose connection on the north side of the building. This connection is open year-round. Only credit/debit cards are accepted. 
• One 2" fire hose connection on the south side of the building. This connection is for commercial water haulers. All water haulers must set up an account with Evergreen Metro District. Credit/debit cards are not accepted. 
  • Water haulers: click here to sign into your account to view balances and apply for or renew your annual water hauling permit

The water rate for all connections is 5¢ per gallon. 

2024 Water Hauling Permit

Questions? Please email ap@evergreenmetro.org

FlowPoint  

The water station uses the FlowPoint system for all three connections. At each connection, customers enter the number of gallons desired, press start, and water is dispensed. Customers are only charged for the number of actual gallons that have passed through the water meter, not the number they entered. 

Keypad Instructions for 3/4" Garden Hose Customers:

1.    Turn black knob clockwise / to the right and open the panel door.
2.    Press Start
3.    Enter the amount of gallons desired.
4.    Press “ENTER”
5.    Credit Card reader will prompt for payment.
6.    Ensure hose is connected, then press “START”
7.    To pause, press “FP.” To stop and end the transaction, press “STOP”
8.    Press “ENTER” to print a receipt.
9.    When done, close the panel door and turn the black knob counterclockwise / left to secure.

Keypad Instructions for Water Haulers:

1.    Turn black knob clockwise / to the right and open the panel door.
2.    Enter your 4-digit access code, the press “ENTER”
3.    Enter your 4-digit PIN, then press “ENTER”
4.    Enter the amount of gallons desired.
5.    Press “ENTER”
6.    Ensure hose is connected, then press “START”
7.    To pause, press “FP.” To stop and end the transaction, press “STOP”
8.    Press “ENTER” to print a receipt.
9.    When done, close the panel door and turn the black knob counterclockwise / left to secure.